7
ELECTRICAL INSTELECTRICAL INST
ELECTRICAL INSTELECTRICAL INST
ELECTRICAL INST
ALLAALLA
ALLAALLA
ALLA
TIONTION
TIONTION
TION
ALL ELECTRICALL ELECTRIC
ALL ELECTRICALL ELECTRIC
ALL ELECTRIC
Dryers Dryers
Dryers Dryers
Dryers
The following are specific requirements for The following are specific requirements for
The following are specific requirements for The following are specific requirements for
The following are specific requirements for
prpr
prpr
pr
oper and safe electrical installation of your droper and safe electrical installation of your dr
oper and safe electrical installation of your droper and safe electrical installation of your dr
oper and safe electrical installation of your dr
yeryer
yeryer
yer
. Failur. Failur
. Failur. Failur
. Failur
ee
ee
e
to follow these instructions can create electrical shockto follow these instructions can create electrical shock
to follow these instructions can create electrical shockto follow these instructions can create electrical shock
to follow these instructions can create electrical shock
and/or a fire hazard.and/or a fire hazard.
and/or a fire hazard.and/or a fire hazard.
and/or a fire hazard.
This appliance
MUSTMUST
MUSTMUST
MUST
be properly grounded. Electrical shock
can result if the dryer is not properly grounded. Follow the
instructions in this manual for proper grounding.
Do not use an extension cord with this dryer. Some extension
cords are not designed to withstand the amounts of electrical
current this dryer utilizes and can melt, creating electrical shock
and/or fire hazard. Locate the dryer within reach of the receptacle
for the length power cord to be purchased, allowing some slack
in the cord. Refer to the pre-installation requirements in this
manual for the proper power cord to be purchased.
A U.L. approved strain relief must be installed onto power
cord. If the strain relief is not attached, the cord can be pulled
out of the dryer and can be cut by any movement of the cord,
resulting in electrical shock.
Do not use an aluminum wired receptacle with a copper
wired power cord and plug (or vice versa). A chemical reaction
occurs between copper and aluminum and can cause electrical
shorts.
The proper wiring and receptacle is a copper wiredThe proper wiring and receptacle is a copper wired
The proper wiring and receptacle is a copper wiredThe proper wiring and receptacle is a copper wired
The proper wiring and receptacle is a copper wired
power cord with a copper wired receptacle.power cord with a copper wired receptacle.
power cord with a copper wired receptacle.power cord with a copper wired receptacle.
power cord with a copper wired receptacle.
NOTE:NOTE:
NOTE:NOTE:
NOTE: Dryers operating on 208 volt power supply will have
longer drying times than operating on 240 volt power supply.
For a permanently connected dryer:
1. The dryer
MUSTMUST
MUSTMUST
MUST be connected to a grounded metal,
permanent wiring system; or an equipment grounding
conductor must be run with the circuit conductors and
connected to the equipment-grounding terminal or lead on
the appliance.
Canadian Canadian
Canadian Canadian
Canadian
ELECTRICELECTRIC
ELECTRICELECTRIC
ELECTRIC
Dryer Dryer
Dryer Dryer
Dryer
DANGER
Improper connection of the equipment
grounding conductor can result in a risk of electrical shock.
Check with a licensed electrician if you are in doubt as to whether
the appliance is properly grounded.
For a grounded, cord-connected dryer:
1. The dryer must be grounded. In the event of a malfunction
or breakdown, grounding will reduce the risk of electrical
shock by a path of least resistance for electrical current.
2. Since your dryer is equipped with a power supply cord having
an equipment-grounding conductor and a grounding plug,
the plug must be plugged into an appropriate outlet that is
properly installed and grounded in accordance with all local
codes and ordinances. If in doubt, call a licensed electrician.
ALL GASALL GAS
ALL GASALL GAS
ALL GAS
Dryers Dryers
Dryers Dryers
Dryers
This dryer is equipped with a three-prong (grounding) plug for
your protection against shock hazard and should be plugged
directly into a properly grounded three-prong receptacle. Do
not cut or remove the grounding prong from this plug.
GROUNDING REQUIREMENTSGROUNDING REQUIREMENTS
GROUNDING REQUIREMENTSGROUNDING REQUIREMENTS
GROUNDING REQUIREMENTS
Non-Canadian Non-Canadian
Non-Canadian Non-Canadian
Non-Canadian
ELECTRICELECTRIC
ELECTRICELECTRIC
ELECTRIC
Dryer Dryer
Dryer Dryer
Dryer
DANGER
Improper connection of the equipment
grounding conductor can result in a risk of electrical shock.
Check with a licensed electrician if you are in doubt as to whether
the appliance is properly grounded.
For a grounded, cord-connected dryer:
1. The dryer
MUSTMUST
MUSTMUST
MUST be grounded. In the event of a malfunction
or breakdown, grounding will reduce the risk of electrical
shock by a path of least resistance for electrical current.
2. If your dryer is equipped with a power supply cord having an
equipment-grounding conductor and a grounding plug, the
plug
MUSTMUST
MUSTMUST
MUST be plugged into an appropriate, copper wired
receptacle that is properly installed and grounded in
accordance with all local codes and ordinances. If in doubt,
call a licensed electrician.
To Next Page
Loading...
Need help?
General
