EasyManua.ls Logo

Frigidaire IM115 - Ice Maker Kit User Manual

Frigidaire IM115 - Ice Maker Kit
7 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
ICE MAKER
INSTALLATION
INSTRUCTIONS
P/N 240394901
The following items will be required to install the ice maker kit.
1/4 inch copper supply line with shut off valve
1/4 inch brass compression nut and ferrule
Freezer shelf (Some models not eqipped with shelf). If your
model does not have one, contact your dealer to order one.
The copper tubing and shut off valve are available in a kit from your
local hardware or plumbing supply store. Coil enough tubing at the
back of the unit to allow movement for cleaning.
To Avoid Property Damage:
Copper tubing is recommended for the water supply line. Water supply tubing made of 1/4
plastic is not recommended since it greatly increases the potential for water leaks.
The manufacturer will not be responsible for any damage if plastic tubing is used for the
supply line.
DO NOT install water supply tubing in areas where temperatures fall below freezing.
Connect the ice maker to a drinkable water source that is not tied into a water softening
system. Chemicals from the softener may damage the ice maker, causing it to
malfunction.
To avoid electric shock, which can cause death or severe personal injury,
disconnect the refrigerator from electrical power before connecting a water supply line to
the refrigerator.
Question and Answer IconNeed help?

Do you have a question about the Frigidaire IM115 - Ice Maker Kit and is the answer not in the manual?

Frigidaire IM115 - Ice Maker Kit Specifications

General IconGeneral
TypeIce Maker Kit
Power Supply115V
BrandFrigidaire
ModelIM115
CompatibilitySelect Frigidaire refrigerators

Summary

Connecting Ice Maker to Water Supply

Before Installing The Water Supply Line, You Will Need

Lists necessary tools, water pressure, and tubing specifications for installation.

To Connect Water Supply Line To Ice Maker Inlet Valve

Details the step-by-step process to connect the water supply line to the ice maker's inlet valve.

Automatic Ice Maker Tips

Ice Maker Operation and Storage

Provides advice on ice storage, signal arm usage, normal operating sounds, and handling new ice.

Ice Container Care and Shutoff

Advises on cleaning the ice container and shutting off the ice maker for extended periods or cleaning.

Related product manuals