Frigidaire EFIC108 - User Manual

Other manuals for Frigidaire EFIC108

Use & Care24 pages

Questions and Answers

M
michaelriceAug 20, 2025
What to do if “Ice Full” and “Add Water” lights are on together in my Frigidaire EFIC108 Ice Maker?
- S
  Stacy WhiteAug 20, 2025
  If the “ADD WATER” and “Ice Full” indicators light up simultaneously on your Frigidaire Ice Maker, it could be due to an electrical power surge, air in the lines, blocked lines, or the water tank's inability to detect the water level. To resolve this, turn off the ice maker, unplug it, add water if needed, plug it back in, and restart the unit. If that doesn't work, inspect the parts, remove the drain cap on the back, drain a small amount of water, replace the cap, and try again. Also, check for ice blocking the ice pusher; if so, turn off the unit, let the ice melt, and then restart it.
R
Ronald MorrisonAug 22, 2025
Why my Frigidaire EFIC108 does not operate?
- T
  Tiffany JuarezAug 22, 2025
  If your Frigidaire Ice Maker isn't operating, ensure it's plugged into a standard 110/120 Volt, 60 Hertz power source. Also, the unit may not operate if the ambient or water temperature is too high. Try running the ice maker in temperatures below 90°F and using colder water in the reservoir.
B
brian24Aug 25, 2025
What to do if the “Ice Full” light is on in my Frigidaire EFIC108?
- K
  Karina WallaceAug 25, 2025
  If the “Ice Full” indicator light is on, it means the ice basket is full. Remove ice from the ice storage basket of your Frigidaire Ice Maker to make more.
W
William PollardAug 26, 2025
Why is my Frigidaire EFIC108 not operating?
- R
  Robert ClarkAug 27, 2025
  Your Frigidaire Ice Maker might not be operating due to a few reasons: * Ensure the unit is plugged into a standard 110/120 Volt, 60 Hertz power source. * The ambient or water temperature might be too high. Operate the ice maker in temperatures below 90°F and use colder water in the reservoir.
T
Taylor WaltonAug 28, 2025
How to fix Frigidaire EFIC108 when “ADD WATER” light is on?
- T
  Terri WilliamsAug 28, 2025
  If the “ADD WATER” indicator light is on, it means the water level is low or there is a lack of water. Add water, and the Frigidaire ice maker will resume operation automatically.
G
georgealejandraAug 29, 2025
Why does my Frigidaire EFIC108 say 'Add Water'?
- A
  Angela MooreAug 30, 2025
  The 'ADD WATER' indicator light turns on because of a low water level or a lack of water. To resolve this, add water, and the icemaker will resume operation automatically.
E
erinrushAug 31, 2025
What to do if my Frigidaire EFIC108 won't turn on?
- D
  Darlene MataAug 31, 2025
  If your Frigidaire Ice Maker isn't operating, ensure it's plugged into a standard 110/120 Volt, 60 Hertz power source. Also, make sure that the ambient temperature is below 90°F and that you are using cold water in the water reservoir.
M
Michael MartinSep 2, 2025
How to fix “ADD WATER” indicator on Frigidaire EFIC108 Ice Maker?
- E
  Eric GarciaSep 2, 2025
  If the “ADD WATER” indicator light is on, it means that the water level is low or there is a lack of water. Add water, and the Frigidaire ice maker will resume operating automatically.
P
Phillip MaddoxSep 4, 2025
What to do if Frigidaire EFIC108 Ice Maker 'Ice Full' and 'Add Water' lights are on?
- B
  Bruce FernandezSep 4, 2025
  If the 'Ice Full' and 'Add Water' indicator lights are on simultaneously, it could be due to an electrical power surge, air in the lines, blocked lines, or the water tank's inability to detect the water level. Try the following: * Turn off the ice maker, unplug it, and refill with water if needed. Plug it back in and restart. * Inspect the related parts; remove the drain cap on the back to drain a small amount of water, then replace the cap and try again. * Check for ice blocking the ice pusher. Turn off the unit, let the ice melt, and restart.
R
Regina NortonSep 6, 2025
What to do if my Frigidaire EFIC108's 'Ice Full' light is on?
- T
  Taylor SmithSep 6, 2025
  If the “Ice Full” indicator light is on, it means the ice basket is full. Remove ice from the ice storage basket to allow the Frigidaire ice maker to make more.

Summary

Important Safeguards

General Safety Precautions

Covers electrical safety, appliance usage, supervision, servicing, and handling of flammable refrigerants.

Safety Instructions

Electrical Safety and Grounding

Details grounding requirements, extension cord usage, and electrical safety during maintenance.

Description of Parts

Component Identification

Identifies all external parts and control panel features of the ice maker.

Before First Use

Initial Setup and Placement

Provides crucial steps for initial setup, including placement, leveling, and initial waiting period.

Use Your Ice Maker

Starting the Ice Making Process

Details the initial steps to start the ice maker, including filling water and plugging in.

Ice Making Cycle Operation

Explains how to select ice size, the cycle duration, and ice formation process.

Indicators and Alerts

Describes 'Ice Full' and 'Add Water' indicator lights and their functions.

Finishing Ice Production

Instructions for stopping the cycle, unplugging, and preparing for storage or cleaning.

Care and Cleaning

Cleaning Procedures

Step-by-step guide for cleaning the ice maker interior, exterior, basket, and scoop.

Troubleshooting Guide

Common Issues and Solutions

Addresses common problems like indicator lights, unit not operating, and no ice production.

Frigidaire EFIC108 Specifications

General

Type	Countertop Ice Maker
Ice Production Capacity	26 lbs per day
Ice Storage Capacity	1.5 lbs
Color	Silver
Ice Shape	Bullet
Water Supply	Manual Fill
Ice Harvesting	Automatic
Power Consumption	120 Watts
Material	Stainless Steel
Ice Cube Size	Small, Large
Cycle Time	6-11 minutes