To Next PageTo Next PageHow to fix Frigidaire EFIC108 when the 'Ice Full' light is on?
If the 'Ice Full' indicator light is on, it means the ice basket is full. Remove ice from the ice storage basket to allow the Frigidaire Ice Maker to make more.
What to do if Frigidaire EFIC108 Ice Maker shows 'Ice Full' and 'Add Water' at the same time?
If both the 'Ice Full' and 'Add Water' indicators light up simultaneously, it could be due to an electrical power surge, air in the lines, blocked lines, or the water tank's inability to detect the water level. Try the following: 1. Turn off the icemaker and unplug it. 2. Fill it with water if needed, then replace the plug and restart the unit. 3. Inspect the relevant parts; remove the drain cap on the back to drain a small amount of water, then replace the cap and try again. 4. Check for ice blocking the ice pusher; turn off the unit, let the ice melt, and restart.
How to resolve ice blockage in my Frigidaire EFIC108 Ice Maker?
If there is an ice blockage and no ice is being made, it may be because making ice is taking too long. Turn off the machine, and after the ice block melts, restart it. Alternatively, you can change the size selector to small ice cubes.
General| Type | Countertop Ice Maker |
|---|---|
| Ice Production Capacity | 26 lbs per day |
| Ice Storage Capacity | 1.5 lbs |
| Color | Silver |
| Ice Shape | Bullet |
| Water Supply | Manual Fill |
| Ice Harvesting | Automatic |
| Power Consumption | 120 Watts |
| Material | Stainless Steel |
| Ice Cube Size | Small, Large |
| Cycle Time | 6-11 minutes |
Covers electrical safety, appliance usage, supervision, servicing, and handling of flammable refrigerants.
Details grounding requirements, extension cord usage, and electrical safety during maintenance.
Identifies all external parts and control panel features of the ice maker.
Provides crucial steps for initial setup, including placement, leveling, and initial waiting period.
Details the initial steps to start the ice maker, including filling water and plugging in.
Explains how to select ice size, the cycle duration, and ice formation process.
Describes 'Ice Full' and 'Add Water' indicator lights and their functions.
Instructions for stopping the cycle, unplugging, and preparing for storage or cleaning.
Step-by-step guide for cleaning the ice maker interior, exterior, basket, and scoop.
Addresses common problems like indicator lights, unit not operating, and no ice production.
