Replacing LED Lights (se,ectmodels)
The fresh food compartments of your refrigerator
may have LED lights. Always use Frigidaire parts for
replacement.
To replace LED Lights:
1 Unplug your refrigerator's power cord.
2 Remove light cover by pushing up and out.
3 Hold the LED cover with one hand and pull the
connector with the other hand while pressing the
connector latch.
4
Replace LED light and snap in place assuring the
light is facing in toward the unit (inside fresh food).
LED Light Removal
Wear gloves when replacing incandescent light bulbs to
avoid getting cut.
To replace light bulbs:
1 Unplug your refrigerator's power cord.
2 Wear protective gloves.
3 Remove light cover, if necessary.
4 Unscrew and replace old bulb with an appliance
bulb of the same type and wattage (normally 40
watts).
5 Replace light cover, if necessary.
6 Plug in the refrigerator's power cord.
i::: Light Sockets I
ugnI_ Located Behind {
Light Cover
LED Light Harness Removal
LED lights are in series so if one is bad or unplugged,
several lights may not light up.
Replacing Light Bulbs (select models)
Both the freezer and fresh food compartments of your
refrigerator include incandescent light bulbs that will
need replacing from time=to-time. Some lights have
covers that need to be removed before replacing the
bulbs. Always use bulbs that are designed for appliance
lighting.
Refrigerator Light
Light Socket
Located in Upper
Freezer Section
Light Cove
Freezer Light
Ordering Replacement LED Lights
Order new LEDs by calling 877-808-4195, online at www.
frigidaire.corn/store, or through the dealer where you
bought the refrigerator. Here is the product number to
request when ordering:
LED Light, Part #241891102
Incandescent Lights (40=watt bulb), Part
#5305514148
To Next Page
Loading...
