Need help?Do you have a question about the Frigidaire LGUB2642LF2 and is the answer not in the manual?
General| Brand | Frigidaire |
|---|---|
| Model | LGUB2642LF2 |
| Category | Refrigerator |
| Language | English |
Outlines essential safe servicing practices for appliance repair.
Lists general safety guidelines for appliance operation and handling.
Detailed steps for connecting the water supply line to the ice maker inlet valve.
Explains various alarms like Door Ajar, High Temperature, and Power Fail.
Lists error codes and their corresponding corrective actions for the main control.
Instructions on how to enter and exit the diagnostic service mode.
Details various diagnostic tests for components like dispenser, compressor, heater, and fans.
Outlines how to use system service mode to diagnose ice and water dispense problems.
Lists inverter components and provides steps for checking/replacing the inverter.
Details how to test the compressor's resistance between terminals.
Flowchart for diagnosing compressor operational issues.
Explains the operation and shows the refrigeration schematic for the Flex Tray ice maker.
Explains the process of ice cube formation and harvest.
Instructions for entering, exiting, and overview of the diagnostic service mode.
Flowchart to diagnose and resolve no ice issues.
Flowchart to diagnose and resolve issues with no water supply.
Flowchart to diagnose and resolve issues causing hollow ice cubes.
Details key components of the finger evaporator ice maker assembly.
Explains the process of ice cube formation and harvest.
Instructions for service mode and lists ice maker error codes.
Procedures for testing harvest motor and troubleshooting no ice conditions.
Flowchart to diagnose issues when the mold is not frozen.
Flowchart to diagnose issues when there is no water or ice.
Flowchart to diagnose issues when the mold contains ice cubes.
Flowchart to diagnose issues when the mold has no water.
Flowchart to diagnose issues when the mold is in an intermediate position.
Flowchart for diagnosing issues related to Freezer Recovery Mode.
Procedure for manually testing the Electronic Expansion Valve (EEV).
Flowchart to diagnose and resolve communication errors.
Troubleshooting steps for ICE-t3 error related to suction line thermistor.
Details the components of the freezer compartment ice maker.
Troubleshooting steps for common ice maker failures like no start or incomplete cycle.
Provides a detailed wiring schematic for the freezer compartment ice maker.
Explains water valve operation and provides schematic diagrams.
Guide on locating and replacing the water filter cartridge.
Procedures for checking resistance, voltage, and water valve operation.
Steps to troubleshoot voltage issues with water valve coils.
Important safety warnings and precautions before beginning component teardown.
Instructions for removing dispenser frame and control assembly.
Detailed steps for removing and reinstalling refrigerator doors and hinges.
Instructions for removing the evaporator fan motor and defrost thermostat.
Outlines essential safe servicing practices for appliance repair.
Emphasizes dedicated equipment and cross-contamination prevention.
Detailed steps on how to safely recover refrigerant from the system.
Identifies symptoms of leaks and procedures for testing.
Detailed steps for compressor replacement and important considerations.
Instructions for replacing the freezer evaporator and suction line.
Instructions for replacing the heat exchanger for finger evaporator ice makers.
Steps for removing and replacing the ice maker evaporator assembly for Flex Tray models.
Instructions for replacing the ice maker jumper tube.
Details the location and replacement steps for the filter-drier.
Detailed steps for achieving the required vacuum levels for the system.
Steps to prepare the charging cylinder with refrigerant.
Detailed steps for charging the refrigeration system with refrigerant.
Identifies leak symptoms, testing procedures, and spill safety precautions.
To Next Page