FRIGOGLASS Plus-500 - STEP-6.1 REMOVE AND REINSTALL FV HANDLE

c
c
b
b
a
a
STEP-6.1
REMOVE AND REINSTALL FV HANDLE
a. Remove decorave taps from door
frame and save them for further using.
b. Accurately remove magnec rubber
profile from door frame.
c. Unscrew the screws that shown
in a picture.
*Use the flat screwdriver.
c. Remove door handle.
d. Accurately remove magnec
rubber profile from the door frame on
another side of the door.
e. Install handle and fix it using screws
that were removed earlier.
f. Apply magnec rubber profile back
to frame on both sides of the door.
g. Install decorave taps.