Fristam Pumpen FDS 2 Series

Need help?

Do you have a question about the Fristam Pumpen FDS 2 Series and is the answer not in the manual?

Summary

2 Safety

2.1 Basic safety notices

General safety instructions for pump operation and handling.

2.2 Intended use

2.4 Pump-specific safety notices

Highlights safety precautions specific to the FDS twin screw pumps.

3 Structure and function

4 Transport

4.1 Safety notices

Safety precautions to be observed during pump transport.

4.2 Transport using forklift

4.3 Transport by crane

6 List

6.1 Safety notices

Safety precautions related to pump installation procedures.

6.2 Installation site

Criteria for selecting a suitable location for pump installation.

6.4 Attach pump

Instructions for mounting the pump to its base frame or chassis.

6.5 Align coupling

Procedures for aligning pump and motor couplings accurately.

6.6 Install pipelines

6.7 Establish electrical connection

Steps for correctly connecting the pump's electrical components.

6.8 Connect barrier or quench fluid (optional)

7 Operation

7.1 Safety notices

Critical safety instructions to follow during pump operation.

7.2 Commence operation

Step-by-step guide for starting the pump safely.

7.4 End operation

Procedure for safely stopping the pump and concluding operation.

8 Cleaning during operation

9 Faults

9.1 Safety notices

10 Maintenance

10.1 Safety notices

10.3 Check the barrier and quench fluid (optional)

10.7 Replace shaft seal

10.8 Dismantle pump head

10.9 Mount pump head

10.10 Replace shaft bearing

11 Appendix 1

11.1 Technical specifications

11.2 Maintenance intervals

11.3 Fault table

A comprehensive table listing pump faults, their causes, and remedies.

12 Appendix 2 - Assembly instructions (optional) for pump with bare shaft

12.1 Safety notice

12.4 Transport without motor

12.4.3 Transport by crane

12.5 Installation site

12.6 Mount pump

Prerequisites and detailed steps for mounting the pump.