The time can be set from 1 to 60 minutes. The timer will count down per
minute. The last minute it will count down in seconds.
Press the symbol to start the appliance.
will blink, during the whole process unless interrupted.
Press to interrupt the started function or open the drawer.
will stop blinking and will be lighted constantly.
Remaining time will be displayed on the screen (blinking).
The appliance will start again when is pressed or when the drawer is
closed again.
This button will only work if the drawer and the basket are correctly
placed in the appliance. The symbol must be lighted.
When you hear a sound signal 3 times, the set program is finished and
will be shown on the display.
When the drawer is opened or is pressed, the screen will return to
previously set program.
When isn’t pressed the appliance will go to standby mode after 5
minutes.
will be shown on the display (blinking).
Press the symbol to select the preheat function, the Pre-Heat
symbol will blink.
Time setting is not possible with this function, will not be lighted.
Press or to set the desired temperature.
Press to start the preheating.
will blink during the whole process, unless interrupted.
When you hear the sound signal 3 times, the preheat program is finished.
will appear again on the display, & will not blink
anymore.
Press or to set the desired time.
Press to start the appliance.
will blink during the whole process, unless interrupted.
To Next Page
Loading...
