Fritz! 1200 - Page 12

12
FRITZ!Repeater in the Home Network
FRITZ!Repeater 1200 on a FRITZ!Box
with Mesh (FRITZ!OS7 or newer)
In the home network of a FRITZ!Box
with Mesh (FRITZ!OS 7 or newer),
operation of your FRITZ!Repeater is
especially easy and convenient.
• When Mesh is enabled, all of the
FRITZ!Box’s Wi-Fi settings are
permanently adopted.
• Updates for the FRITZ!Repeater
can be performed directly in the
FRITZ!Box user interface under
“Home Network / Mesh”.
• Mesh Wi-Fi provides for the
optimum Wi-Fi connections of all
wireless devices.
During conguration at the
press of a button (see
page 6, the FRITZ!Repeater
is automatically enabled for
Mesh. When “LAN bridge”
access mode is congured,
Mesh has to be enabled; see
page 10.
FRITZ!Repeater 1200 on a FRITZ!Box
without Mesh or a Wireless Router
from Another Manufacturer
• During conguration the
FRITZ!Repeater adopts the Wi-Fi
network name and Wi-Fi pass-
word of the FRITZ!Box (wireless
router).
• If the Wi-Fi network name and/
or password is changed in the
FRITZ!Box (wireless router),
the FRITZ!Repeater has to be
reconnected.
• Settings and updates for the
FRITZ!Repeater are congured
and performed via the FRITZ!Re-
peater user interface.