Fritz! 1750E - Button Operations; Button Functions

Establishing a Connection Manually
You can establish the wireless connection to the wireless access point manually.
Requirements
 Your computer must have a LAN port.
 At the LAN port an IP address must
be obtained automatically (DHCP).
Establishing a Connection
1. Connect your computer with the
FRITZ!WLANRepeater 1750E using
the LAN cable included in the
package.
2. Open the browser on your computer
and enter
http://fritz.repeater in
the address fi eld.
3. The FRITZ!WLANRepeater 1750E
Wizard appears and guides you
through the remaining confi guration
steps.
Next you can confi gure the
FRITZ!WLANRepeater 1750E in a user
interface. For more information, continue
reading from page 13.
The FRITZ!WLANRepeater 1750E can also
be manually connected with a wireless
access point.
User Interface
The FRITZ!WLANRepeater 1750E has a user interface. In the user interface you can
confi gure the FRITZ!WLANRepeater 1750E using a Wizard, enable functions, view
information about connections, change the operating mode, or perform a FRITZ!OS
update.
The user interface can be opened on every computer connected with the
FRITZ!WLANRepeater 1750E or your wireless access point:
1. Open a web browser.
2. Enter
http://fritz.repeater in the address fi eld of the browser.
The user interface opens.
Web browser: opening the user interface with http:// fritz.repeater
12 13
English
English