EasyManua.ls Logo

Fritz! 310 - Integration with Other Access Points; Using WPS with Non-AVM APs; Technical Data and System Requirements; Technical Specifications Overview

Fritz! 310
40 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
On a Wireless Access Point from Another Manufacturer
For registration with a wireless access point via WPS, the FRITZ!WLAN Repeater 310 adopts the SSID
(radio network name) and network key of the wireless access point.
Updates are performed directly in the user interface of your FRITZ!WLAN Repeater 310 under System/
Update.
The FRITZ!WLAN Repeater 310 user interface can be opened on all connected devices using the IP
address it was assigned by your wireless access point.
First check the user interface of your wireless access point to fi nd out what IP address the FRITZ!WLAN
Repeater 310 was assigned, and then enter this IP address in the address line of a web browser.
See the documentation for your wireless access point.
Technical Data
IEEE802.11n, compatible with IEEE802.11b/g
Up to 300Mbit/s (gross); the user data rate
that can actually be achieved is somewhat
below the specifi ed values.
WEP 64/128, WPA, WPA2 (802.11i)
Total power consumption: approx. 3W
Wireless LAN: 2.4GHz max. 100mW
230V, 50Hz A/C
0°C to +40°C
Dimensions: 81mm x 51.5mm x 66.5mm
Weight: approx. 63g
Two integrated antennas
System Requirements
2.4GHz wireless access point compliant with
IEEE802.11b/g/n, automatic IP address
assignment (DHCP)
The wireless access point must support the
encryption standard WPA or WPA2.
For expanded Mesh WiFi functions: FRITZ!Box
with FRITZ!OS version 6.90 or higher
Automatic IP address assignment (DHCP)
For initial confi guration with WPS: WPS-compli-
ant wireless access point
For initial confi guration without WPS: computer
with wireless LAN that supports the WPA
encryption standard
For the fi rst confi guration of WLAN: If the MAC
address fi lter is active in the wireless access
point, the MAC address of the FRITZ!WLANRe-
peater must be entered as an exception in the
MAC address fi lter
FRITZ!WLANRepeater 310 in the Home Network
10 11

Related product manuals