Fritz! FRITZ!Box 6660 Cable - Configuring Telephones

Configuring Telephones
Overview
Once you have connected your telephones, answering machines and
fax machines, configure these devices in the FRITZ!Box. For each de-
vice, specify:
• Telephone number for outgoing calls to the public telephone net-
work
• How incoming calls should be handled: Should the device react
(ring, for instance) to every call, or only respond to calls for certain
telephone numbers?
• Further settings that depend on the kind of device.
For IP telephones you can also enable international calls. IP telephones
are configured in the FRITZ!Box such that only domestic calls and calls
to emergency numbers are possible.
Requirements
• Your own telephone numbers are set up in the FRITZ!Box.
Instructions: Configuring Telephones and Other Devices
1. Open the user interface; see page55.
2. Select „Telephony / Telephony Devices“.
3. If the device to be configured is not yet included in the list of
telephony devices, click on “ConfigureNewDevice.” The wizard
guides you through the assignment of telephone numbers and
enters the device in the list.
4. To configure further settings for a device in the list, click on the
“Edit” button of the device. The kind of device determines which
additional settings are available.
FRITZ!Box 6660 Cable 71
Configuring
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •