Operation Requirements
FRITZ!WLAN USB Stick – 1 FRITZ!WLAN USB Stick at a Glance 7
1.2 Operation Requirements
In order to operate FRITZ!WLAN USB Stick, your computer
must meet the following requirements:
z A USB port on your computer. A USB 2.0 port is recom-
mended; USB 1.1 works at a lower transmission rate.
z A computer with one of the following operating systems
installed:
Microsoft Windows Vista x64 Edition, Microsoft
Windows Vista, Windows XP Professional x64 Edition,
Windows XP or Windows 2000 (the latest service packs
and updates are recommended).
z Pentium-class computer or notebook (500 MHz CPU or
better).
z At least 64 MB RAM and 5 MB free memory on the hard
drive.
z one CD drive
You can install FRITZ!WLAN USB Stick if your computer meets
all of these requirements.
If you would like to connect additional computers, additional
FRITZ!WLAN USB Sticks are required.
1.3 LEDs
During operation, the orange LEDs on the FRITZ!WLAN USB
Stick indicate the following:
WLAN flashes during data exchange between WLAN de-
vices
USB remains lit as soon as the FRITZ!WLAN USB Stick
has been detected by the operating system
To Next Page
Loading...
