Fritz! X6 - DECT Base Station Connectivity; Base Station Registration Requirements; Managing Multiple Base Stations; Deregistering Base Stations

16
FRITZ!Fon on a DECT Base Station
For operation, the FRITZ!Fon must be registered
with a DECT base station that is connected with
the internet or the landline telephone network.
The FRITZ!Fon can be registered on up to 4 DECT
base stations, but actively connected with only
one DECT base station at a time.
Registering with Further DECT Base Stations
1. Press the key.
2. Navigate to Settings / Registration /
Register.
3. Follow the instructions on the display.
If your DECT base station is not a FRITZ!Box,
be sure to have the PIN of your DECT base
station on hand for entry on the FRITZ!Fon.
Switching Active DECT Base Stations
1. Press the key.
2. Navigate to Settings / Registration / Select
base.
3. Select a DECT base station and press .
Deregistering from a DECT Base Station
1. Press the key.
2. Navigate to Settings / Registration /
Deregister.
3. Select a DECT base station and press .