“go to TABLE OF CONTENTS”
FRIULINOX ALI GROUPS.R.L. A SOCIO UNICO 28
Via Treviso,4 - 33083 Taiedo di Chions (PN) -Italy
7. Disconnect the LED light cable.
8. Disconnect the probes.
9. Disconnect the connection between board and
transformer.
10. Remove the wiring board from its seat by loosening
the six screws locking it, paying attention to the
connection with the keyboard board.
11. Gently lift the keyboard board from the side stops.
12. Replace the board by gently inserting it in its seat and
securing the wiring board with the six screws.
To Next Page
Loading...