“go to TABLE OF CONTENTS”
49 FRIULINOX ALI GROUPS.R.L. A SOCIO UNICO
Via Treviso,4 - 33083 Taiedo di Chions (PN) -Italy
7. Open the belt that secures the evaporator protective
casing.
8. Lift and remove the protective casing from its seat,
paying attention to the compensation valve, if any.
9. Remove the plastic protection from the cables.
10. Remove the sealant to identify the probe.
11. The probe is located in the suction point of the
conveyor.
12. Replace the probe by removing the sticky tape that fixes
it.
To Next Page
Loading...