Friulinox Cube Series - Page 50

“go to TABLE OF CONTENTS”
FRIULINOX ALI GROUPS.R.L. A SOCIO UNICO 50
Via Treviso,4 - 33083 Taiedo di Chions (PN) -Italy
Service Manual
13. Reposition the probe.
14. Close the cable passage with sealant.
15. Reposition the casing, closing it with the belt.
16. Secure the ties and connect the probe to the board.
17. Close the electric box by tightening the two locking
screws using a screwdriver.
18. Close the front panel again, paying attention to the
door microswitch.