“go to TABLE OF CONTENTS”
FRIULINOX ALI GROUPS.R.L. A SOCIO UNICO 56
Via Treviso,4 - 33083 Taiedo di Chions (PN) -Italy
8.6.9. Condenser fan replacement
1. Loosen the central screw closing the front panel using a
screwdriver.
2. Lift the front panel, being careful to secure it to the
rear body.
3. Loosen the four conveyor fixing screws to the
condenser.
4. Gently remove the conveyor from its seat.
5. Loosen the fan fixing screws to the conveyor and
replace the fan, remembering to position the fans with
the suction direction.
6. Reposition the conveyor on the condenser.
Close the front panel paying attention to the door
microswitch.
To Next Page
Loading...