“go to TABLE OF CONTENTS”
59 FRIULINOX ALI GROUPS.R.L. A SOCIO UNICO
Via Treviso,4 - 33083 Taiedo di Chions (PN) -Italy
8.9. Cell light replacement
1. Loosen the central screw closing the front panel using a
screwdriver.
2. Lift the front panel, being careful to secure it to the
rear body.
3. Remove the electric box by loosening the two locking
screws using a screwdriver.
4. Disconnect the light from the board.
5. Carefully remove the two clips holding the
protective glass.
6. Gently remove the light from the seat, being careful
not to drop it.
To Next Page
Loading...