Friulinox Cube Series - Lock Mechanism Replacement

“go to TABLE OF CONTENTS”
FRIULINOX ALI GROUPS.R.L. A SOCIO UNICO 58
Via Treviso,4 - 33083 Taiedo di Chions (PN) -Italy
Service Manual
8.8. Lock replacement
1. Loosen the central screw closing the front panel using a
screwdriver.
2. Lift the front panel slightly.
3. Use the master key to remove the block from the seat
and install the new lock.
4. Close the front panel paying attention to the door
microswitch.