Need help?Do you have a question about the Friulinox REACH-IN BLAST and is the answer not in the manual?
Guidance on correctly placing the unit and interpreting its data plate.
Detailed explanation of the unit's refrigeration circuit components and function.
Description of the water circuits, including inlet, outlet, and spray systems.
Mapping of components to specific terminals on the electronic control board.
Tables showing temperature probe resistance values at different temperatures.
Overview of the primary operating modes like Blast Chilling and Thawing.
Details on adjustable parameters for setting operational points and cycles.
List of pre-set parameters with their default, min, and max values.
Step-by-step guide for replacing different electronic control boards.
Procedures for replacing core, air, and evaporator temperature probes.
Instructions for adjusting the unit's door for proper sealing and alignment.
Guide on how to replace the door gasket for effective sealing.
Procedure for replacing the frame resistance or lid components.
Steps for accessing and cleaning the condenser filter.
Instructions for replacing the evaporator fan unit.
Procedure for replacing the condenser fan.
Step-by-step guide for replacing the main compressor unit.
Guide for replacing the door microswitch component.
Instructions for replacing the water filling solenoid valve.
Procedure for replacing the chamber heating elements.
Guide on replacing the chamber humidity inlet nozzle.
Steps for downloading and installing software updates via USB.
Procedure for transferring parameters using a USB stick.
Overview of alarm conditions, their display, and reset procedures.
Guides for troubleshooting issues that do not trigger specific alarms.
To Next Page
General