EasyManua.ls Logo

Frog Bikes Bike User Manual

Frog Bikes Bike
7 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Your New Frog Bike
Congratulations on purchasing a new bike and thank
you for choosing Frog!
We know that you must be raring to go but before you
do there’s a few little things still to do to get you up
and running safely. So just follow these simple steps
and in a few minutes you’ll be ready to hit the road.
The following pages will help you fully understand
your bike and how to look after it.
A few basic tools
It’s easy to get your Frog Bike ready. All you need to make the final pre-ride
adjustments are some standard allen keys and a size 15 spanner for the
pedals.
Ok, lets get started
If your new Frog Bike has been delivered to your home you just need to fit
the front wheel, twist the handlebars and fit the pedals. Then you need to
make the final size adjustments. Don’t worry, it’s easy to do and only takes a
few minutes. If you have picked your new Frog Bike up from a shop most of
this will already be done for you, but your safety is very important to us - so
please check these anyway.
Frog Bikes
Manual
Issue 3
September 2013
frogbikes.com
Question and Answer IconNeed help?

Do you have a question about the Frog Bikes Bike and is the answer not in the manual?

Frog Bikes Bike Specifications

General IconGeneral
BrandFrog Bikes
ModelBike
CategoryBicycle
LanguageEnglish

Summary

In The Box Components

Bike Assembly Steps

Fitting the Front Wheel

Instructions for attaching the front wheel, including brake disconnection and quick-release lever usage.

Fitting The Handlebars

Steps for correctly positioning and securing the handlebars onto the stem and headset.

Connecting The Front Brakes

Guide to connecting the front brake cable to the caliper mechanism for safe operation.

Fitting The Saddle

Instructions for adjusting the saddle height and position for optimal rider comfort and safety.

Tyre Pressure Maintenance

Guidance on checking and maintaining correct tyre pressure using Schrader valves for safety.

Adding Pedals

Steps for correctly installing the right and left pedals into the crank arms.

Adding Mudguards

Instructions for fitting both front and rear mudguards using bolts and nuts.

Adding Reflectors

Steps to attach front and rear reflectors for improved visibility.

Adding The Bell

Instructions for mounting the bicycle bell for easy rider access.

Maintaining Your Frog Bike

Oiling Moving Parts

Advice on regularly oiling the chain, gears, pedals, and bearings for optimal bike maintenance.

Getting Started with a Tadpole Balance Bike

Warranty Information

Related product manuals