Need help?Do you have a question about the Froilabo TRUST Series and is the answer not in the manual?
Details environmental conditions and disposal considerations for the device.
Covers receiving, moving, and unpacking the freezer safely.
Details environmental conditions, placement, and leveling requirements.
Explains electrical requirements and connection types for the freezer.
Details factory presets and operational temperature ranges for different models.
Describes the exterior, insulation, door mechanisms, and key components.
Explains how to modify the target temperature using the regulator.
Details the procedure for configuring temperature alarm thresholds.
Explains the LED indicator for the 230 VAC power supply status.
Describes the indicator for temperature deviations from the setpoint.
Explains the LED for high pressure in the compressor cooling circuit.
Details the LED indicating a low battery charge state.
Describes the indicator for the freezer door being left open.
Explains the LED for the compressor running nonstop for extended periods.
Describes the flashing LED during CO2/LN2 injections.
Essential steps before performing any maintenance procedures.
Procedures for cleaning the freezer's interior, exterior, and specific components.
Instructions for preparing the freezer for extended periods of non-use.
Safety guidelines and precautions for using liquid CO2 backup systems.
Safety guidelines and precautions for using liquid nitrogen (LN2) backup systems.
Guidelines for safely moving the freezer device.
Information on proper disposal and regulations for electronic equipment.
To Next Page
General
