Fromm FS4 Series - Page 46

FROMM
FROMMFROMM
FROMM FS4.1893-Manual-30.18XX.02-EN-Version02_R1
It is forbidden to duplicate this manual or parts of it in any way or any form without written permission of the author © 2013
www.fromm-stretch.com
46
INFORMATION BUTTON:
Information button, displays various information
parameters.
Displays several information as below, to pass trough the displayed information, push + or – buttons.
TOTAL PRODUCED
PALLETS XXXXX
XXXXX are the total number of produced pallets in lifetime of the machine.
“TOTAL”
PRODUCED PALLET
PROG XXXXXXXXXX
Are the produced pallets for the, at that moment selected program.
“SUBTOTAL”
TOTAL CONSUMED
FILM XXXXXXXXM
Total consumed film in lifetime of the machine. “TOTAL”
TOTAL CONSUMED
PROG XXXXXXXXXXm
Is the used film for the, at that moment selected program. “SUBTOTAL”
LANGUAGE
Select the language: “LINGUA:(0-11)”
ITALIANO
LANGUAGE
LANGUE
DANISCH
SPRACHE
TAAL
IDIOMA
SPRAK
KIELI
LINGUA
SPRAK
After the language is displayed press start for the selection of the
language.
CARRIAGE RETURN
IN LOWEST LEVEL
After an automatic cycle, the carriage stops on the bottom limit switch
without moving upward.
This function is selectable by pressing the stat button.
Selection YES/NO
CHANGE USER
PASSWORD
Change user password.
STOP POSITION
XXX
THE TABLE STOPS AT 0° (DEFAULT) ,OR 90° ,OR 180° OR 270°
FROM THE ORIGINAL HOME POSITION.
CUTTING DEVICE
XXX
CUTTING DEVICE ENABLED/DISABLED Selection YES/NO