Fromm FS4 Series - Page 50

FROMM
FROMMFROMM
FROMM FS4.1893-Manual-30.18XX.02-EN-Version02_R1
It is forbidden to duplicate this manual or parts of it in any way or any form without written permission of the author © 2013
www.fromm-stretch.com
50
WRAPPING PROGRAMS
7.
Pallet foot 1
(in combination with another program), At the pre set
height the carriage will halt and repeat again the number of pre
selected bottom wraps. This function is to select before starting the
cycle. This function can be very useful when you have fix the goods
onto the pallet, in the case that the products are stacked very wide
within this pallet.
8.
Palle
t foot 2
(in combination with another program), At the pre set
height the carriage will halt and repeat again the number of pre
selected bottom wraps. This function is to select before starting the
cycle. This function can be very useful when you have fix the goods
onto the pallet, in the case that the products are stacked very wide
within this pallet.
9.
Banderol
The program will start and at every pre-selected distance
the carriage will halt and wrap the pre-selected ammount of wraps.
1-9
10.
Doubl
e stroke
The machine will start and will make the UP-Down
program. After returning in Zero automaticly the machine will restart
appling a double layer film on the already wrapped pallet. The
ammoutn of restarts can be selected at the OP. Settings available
from 1-9