2
Wall mounting and minimum clearances
1
3
5
4
5
2
> 30mm
> 30mm
> 15mm
> 15mm
Fig. 1 Charger with optional wall bracket (DIN rail
TS 35, EN 50022)
NOTE: If fixing to the wall, please note the weight of the charger. The bracket
must be fitted to a suitable wall using the correct dowels and screws.
Important! Observe minimum clearances for ventilation purposes. Ensure an adequate
supply of fresh air.
Fig. 2 Minimum clearances
Mounting on the
wall
(3)
(4)(1)
(1)
(2)
Floor installation
option
Fig. 3 Floor installation option
(1) Foot
(2) Catches
(3) Shims
(4) Screw 2.9 x 13
To Next Page
Loading...
