Need help?Do you have a question about the Fronius IG 5100 and is the answer not in the manual?
General| Rated Power | 5100 W |
|---|---|
| Max. apparent AC power | 5100 VA |
| AC Nominal Power | 5100 W |
| Max. AC Power | 5100 W |
| AC voltage range | 202 - 264 V |
| MPP voltage range | 200 - 450 V |
| Number of MPP Trackers | 1 |
| Protection Class | IP 44 |
Safety measures to protect users and the device from electrical hazards.
States compliance with FCC rules regarding radio frequency interference.
Describes the GFDI circuit for detecting and interrupting ground faults.
Explains the inverter's function of transforming DC solar power to AC.
Details the inverter's automatic grid monitoring and MPPT operation.
Covers the inverter's display interface and data logging capabilities.
Provides safety guidelines and an overview of connecting the inverter.
Details the physical connection points and cable entry methods.
Guidelines for selecting an optimal installation site and environmental considerations.
Step-by-step instructions for physically mounting the inverter.
Detailed procedure for connecting the inverter to the AC grid.
Instructions for connecting the DC input from solar module strings.
Outlines the initial startup sequence and basic tests.
Explains how to install optional system upgrade cards.
Covers setting up network communication for data monitoring.
Overview of the inverter's controls, indicators, and display.
Details the inverter's startup sequence and grid synchronization process.
Instructions on how to navigate the inverter's menu system.
Explains the different modes for viewing operational data on the display.
Describes specific data parameters shown in various display modes.
Guides users through configuring inverter settings and parameters.
General guidance for identifying and resolving operational issues.
Explains status codes indicating normal operating conditions or minor issues.
Lists temporary fault codes related to public grid conditions.
Details temporary codes related to grid voltage and frequency deviations.
Describes codes for operational interruptions like overcurrent or over-temperature.
Lists codes indicating internal communication or component faults.
Covers minor issues such as EEPROM faults or address conflicts.
Information on when and how to contact technical support.
Provides detailed specifications for various Fronius IG inverter models.
Information regarding product warranty and end-of-life disposal.
Documents regulatory certifications and compliance standards.
To Next Page