3
I. ASSEMBLY INSTRUCTIONS
1. PLACE the BASE BOTTOM (C) on your work
area. See Diagram 1.
Diagram 1
2. FILL the BASE BOTTOM (C) with a HEAVY
medium such as SMALL STONES (PEBBLES) or
SAND. (This must be purchase from your local
hardware store or landscape supply company.) See
Diagram 2.
NOTE: A MINIMUM of 220 lbs is required to operate
your umbrella safely.
Diagram 2
3. AFTER the BASE BOTTOM (C) has been filled,
PLACE the BASE TOP (D) on top of the BASE
BOTTOM (C). See Diagram 3.
This will now be referred to as the BASE
ASSEMBLY.
Diagram3
4. Place the UMBREALL MOUNT (B) on top of the
BASE ASSEMBLY. See Diagram 4.
Diagram 4
To Next Page
Loading...
