MAINTENANCE(cont’d)
• Make sure attachment is properly secured,
adjusted, and in good operating condition.
• Before leaving operator’s seat, lower lift arms
and put attachment on the ground. Engage
brake, stop engine, remove key, and remove
seat belt.
• Never perform service or maintenance with
engine running.
• Keep all persons away from operator control
area while performing adjustments, service, or
maintenance.
• Tighten all bolts, nuts, and screws to torque
chart specifications. Check that all cotter pins
are installed securely to ensure equipment is in
a safe condition before putting unit into ser-
vice.
STORAGE
• Block equipment securely for storage.
• Keep children and bystanders away from stor-
age area.
SAFETY RULES
ATTENTION! BECOME ALERT! YOUR SAFETY IS INVOLVED!
Safety Rules 6
To Next Page
Loading...
