5
• Choose a table or surface top that is sturdy. Make sure the table or cabinet is
structurally solid, sturdy and out of the way of foot traffic.
•
Properly mount and securely fasten the table stand onto the bottom of the
speaker. Make sure the stand is fully open and screwed on tightly, and that the
speaker does not wobble when in an upright position.
If mounting on the wall, consider the following:
• The power supply cord needs to reach the wall outlet. Make sure the power
supply is within reach of the speaker in its wall-mounted position.
• The teacher should be able to reach the controls located on top of the speaker
once it’s mounted. Once the volume is set at a comfortable level, the speaker
power switch located on the lower right side of the speaker can be easily accessed
by the teacher. Follow the instructions on page 32 for setting the volume at the
proper level.
•
Never mount the speaker upside down, or horizontally. The speaker unit must
be mounted so the controls are located at the top of the unit.
Setup Tips (cont’d)
To Next Page
Loading...
