In the morning –
• Turn transmitter power ’on’ and put microphone on.
• Turn speaker column power ’on’. T
he speaker should remain plugged into a
wall power outlet during the day – with the power in the ‘on’ position. Turn power
switch to the ‘off’ position at night after each use. If your system has an internal
battery, it is not being used while the speaker is plugged into a wall outlet.
•
To operate as a portable system, i
f your system is equipped with an internal
battery simply unplug the speaker before use and plug back in after use. The
battery takes 8 hours to reach a full charge; at full charge, the speaker column
battery will last up to 5 hours unplugged.
After each use –
• Turn transmitter power ’off’, and place it back onto the charging stand;
confirm that the ‘charge’ indicator light illuminates. Transmitters not in use
should always be placed on the charging stand.
• Turn speaker column power ’off’. L
eave speaker plugged into wall power
outlet, but confirm that the power has been turned ‘off.’
6
2 Operating Tips
To Next Page
Loading...
