DANGER! RISK OF ELECTRICAL AND
FIRE HAZARD. MAY RESULT IN DEATH,
SERIOUS INJURY, SHOCK OR BURNS.
TO HELP REDUCE THIS RISK:
This receiver, like all electrical products,
MUST be treated with respect. Follow these
instructions to reduce electrical hazard risk.
1. PROPER GROUNDING AND
AC POWER CONNECTION
o The receiver MUST be grounded to
reduce risk of electric shock. The
receiver is equipped with an electric
cord having an equipment grounding
conductor and a grounding plug.
The plug MUST be plugged into an
outlet that is properly installed and
GROUNDED in accordance with all
local codes and ordinances. If you
ever feel even a slight shock from this
or any electrical appliance, stop, walk
away. Turn off electricity to outlet, and
ELECTRICAL WARNINGS:
have it inspected by an electrician.
You may have a dangerous,
improperly wired outlet.
o DANGER - NEVER alter AC power
cord or plug provided - if it will not
fit in the outlet, have proper outlet
installed by a qualified electrician
or proceed as shown in the illustra-
tion below. Improper connection
can result in a risk of an electric shock.
This battery the receiver is for use on a
nominal 120 volt circuit (common
household current), and has a ground-
ing plug as illustrated. A temporary
adapter may be used, USA only, to
connect this plug to a two-pole recep-
tacle, as shown, if properly grounded
outlet is not available. The temporary
adapter should be used only until a
properly grounded outlet can be
installed by a qualified electrician.
To Next Page
Loading...
