38
17
adjust transmitter(s) frequency
Use a screwdriver to turn frequency
selector to channel number that match-
es the channel set on column speaker
1
If using both body-worn and hand-
held transmitters set one transmitter
channel to match a Channel A on
the speaker column, and the other
transmitter channel to match
a Channel B channel on the
speaker column.
2
NOTE: Never operate two transmitters on
the same channel or interference will result.
To use two transmitters, set the first to
match receiver
Channel A and the second
to match receiver Channel B.
must
match
1
921T
922T
920SR
must
match
2
To Next Page
Loading...
