setup tips (cont’d)
5
• Choose a table or surface top that is sturdy.
Make sure the table or cabinet is structurally solid, sturdy and out of the way of foot traffic.
• Properly mount and securely fasten the T-bar speaker stand onto the bottom
of the speaker. Make sure the stand is screwed on tightly, and that the speaker does
not wobble when in an upright position.
If mounting on the wall, consider the following:
• The power supply cord needs to reach the wall outlet. Make sure the power
supply is within reach of the speaker from its wall-mounted position.
• The teacher should be able to reach the controls located on top of the speaker
once it’s mounted. Once the volume is set at a comfortable level, the speaker power
switch located on the lower right side of the speaker can be easily accessed by the
teacher. Follow the instructions on page 28 for setting the volume at the proper level.
• Never mount the speaker upside down, or horizontally. The speaker unit must be
mounted such that the controls are located at the top of the unit.
To Next Page
Loading...
Need help?
General
