" " to position " " (must be tightened);
6. Put cup(s) under coffee outlet;
7. Touch the double-cup coffee switch“ ”, the machine starts pumping water,
and coffee flows out of the coffee nozzle;
8. The coffee machine automatically stops working (the light from Breathing light
on to a constant light), and the coffee is made at this time, then remove the
coffee cup;
Warning: Do not leave the coffee machine unattended during the coffee
making process, as it sometimes requires manual operation.
9. After the coffee is made, take out the high-pressure funnel assembly by
rotating it clockwise, clean the coffee grounds in the filter in time, and rinse it
with hot water. Touch the single-cup or double-cup coffee button, flush the
outlet with water, install the clean high-pressure funnel assembly on the
outlet, and wait for the next use.
10. When making a single cup of coffee, use a single-cup coffee filter, touch the
single-cup coffee switch when making, and the other steps are the same as
double-cup coffee making.
Warning: Do not touch the hot surfaces of the machine with hands to avoid
scald, especially brewing outlet, steam nozzle when use machine.
To Next Page
Loading...