EasyManua.ls Logo

Frost Fighter IDF500 - Safety and Warnings; Important Safety Instructions

Default Icon
31 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
IMPORTANT INSTRUCTIONS
1. READ ALL INSTRUCTIONS BEFORE INSTALLING OR USING THIS
HEATER.
2. This heater is hot when in use. To avoid burns do not touch hot surfaces.
Keep combustible materials such as furniture, papers, clothes, curtains, tarps,
plastic sheets, combustible building materials & partitions, other equipment, etc.
at least 10 feet (3 m) from the front of the heater and keep them away from the
sides and rear.
3. Do not operate any heater after it malfunctions. Disconnect power at the
service panel and have it inspected by a qualified electrician before reusing.
4. To disconnect heater, turn controls to off and disconnect power supply cord
from power source.
5. Do not insert or allow foreign objects to enter any ventilation or exhaust
opening as this may cause overheating or fire or damage to the heater.
6. To prevent a possible fire, do not block air intake or exhaust in any manner.
7. Do not use it in areas where gasoline, paint, or flammable vapors or liquids
are used or stored.
8. Use this heater only as described in this manual. Any other use not
recommended by the manufacturer may cause fire, electric shock or injury to
persons.
9. This heater may include a visible or audible alarm to warn that parts of the
heater are getting excessively hot. If the alarm illuminates (or sounds),
immediately turn the heater off and inspect for any objects on or adjacent to the
heater that may have blocked the airflow or otherwise caused high temperatures
to have occurred. Do not operate with the alarm illuminating (or sounding)
SAVE THESE INSTRUCTIONS

Other manuals for Frost Fighter IDF500

Related product manuals