To Next PageTo Next Page
Need help?Do you have a question about the Frosty Factory 217 and is the answer not in the manual?
General| Brand | Frosty Factory |
|---|---|
| Model | 217 |
| Category | Freezer |
| Language | English |
Explains manual usage, safety notations, and warnings for operator safety.
Guide to unpacking, checking for shipping damage, and verifying included accessories.
Detailed identification and labeling of machine components with part numbers.
Provides physical measurements and required clearance for installation and ventilation.
Emphasizes reading and understanding safety precautions and operating instructions before use.
Covers placement, leveling, ventilation, power connection, and grounding for the machine.
Details the operation of the selector switches for normal, cooling, cleaning, and off modes.
Guidance on mix composition, sugar content (brix), and alcohol percentage for proper freezing.
Explains the Torque Consistency Control (TCC) for adjusting beverage texture and thickness.
Details expected freeze time and factors affecting it, such as conditions and mix composition.
Step-by-step guide for cleaning and sanitizing the frozen drink machine.
Instructions for correctly reassembling components after cleaning or maintenance.
Schedule for daily, weekly, and monthly checks to ensure optimal machine performance.
Procedures for properly preparing and storing the machine during extended shutdown periods.
Solutions for common problems like machine not running or beater motor issues.
Troubleshooting for product not freezing, dripping, or consistency problems.
Solutions for compressor cycling, beater bar not turning, or mix discoloration.
Step-by-step guide for installing the faucet assembly onto the faceplate.
Procedure for mounting the faceplate onto the front of the machine.
Describes the float switch assembly, its parts, and correct installation orientation.
Illustrates the wiring and components of the thermostat assembly.
Instructions for using brushes to clean the drip tube and ceramic ring.
Step-by-step guide for assembling the beater bar with scraper blades and springs.
Procedure for installing the assembled beater bar into the machine cylinder.
Guide to lubricating the beater shaft and correctly installing the beater seal.
Ensures proper contact between carbon ring and ceramic seal for dry seal operation.
Instructions for using a puller tool to remove the old ceramic seal.
Procedure for installing a new ceramic seal, including silicone application and drying.
Diagram showing the placement of electrical components within the machine's control box.
Detailed electrical drawing illustrating the connections and flow of power in the machine.
Items to check before contacting the factory for assistance with machine issues.
Information on what details to provide when calling for factory support.
Explains the warranty period, exclusions, and conditions for Frosty Factory machines.
Details what is not covered by the warranty, including misuse and lack of maintenance.
