Install shield.
Install plate, put a spacer ring rst, then x it. And insert fender to
plate.
03Fast Installation
3
Fix four screws on handlebar.
1. Inspect equipment
Check all bolts & nuts,brakes,engine etc.
2. Check and clean the air lter
The air lter must be often cleaned, or the polluted air lter will
lower the out put power of the engine. If the air lter is blocked
by dust, use gasoline to clean the air lter, then dip in the oil,
wring oil out and put the air lter back.
04Preparation
Before Start-up
To Next Page
