FRYAIR TOUCH - Troubleshooting Guide

Problem
Probable Reason
Solution
FryAir light turns on and
off.
THIS IS NORMAL
The FryAir is going
through a normal
cooking cycle.
During the cooking
process the heating
elements and therefore
the light will turn off and
on to ensure that the
desired temperature is
maintained.
You want to add more
food or turn the food
that is cooking.
To add more food and to
ensure even cooking.
Open the lid of the
FryAir and make
necessary additions or
movements.
Be as quick as possible
to avoid too much loss
of heat.
TAKE CARE – THE
INSIDE OF THE
FRYAIR IS VERY HOT
AND HOT STEAM
WILL BE RELEASED
WHEN THE LID IS
OPENED.
The FryAir is beeping.
The cooking
cycle is
finished.
Check that your food is
cooked to your
satisfaction, remove
from the FryAir.
Food is not cooked
through.
Setting time was too
short or heat selection
was too low.
Refer back to recipe
guidelines where
relevant.
Increase the time and/or
the temperature and/or
fan setting as necessary.
Food is over cooked or
burnt.
Setting time was too
long or heat selection
was too high or fan-
force setting was too
high.
Refer back to recipe
guidelines where
relevant.
Decrease the time
and/or the
temperature and/or
fan-force as
necessary.
TROUBLE SHOOTING GUIDE