Frymaster Cooking Computer KFC-1 SMS - Page 25

2-10
2.2.2 Programming for Colonel’s Crispy Strips (cont.)
9
10
11
12
Computer displays
PREALM 2.
Press PROG SCAN
button to advance to
Exit Cycle program
mode.
Computer displays EX-CYCLE in the left display
and SET--TEMP in the right display.
Press ENTER button to save default setting of
SET--TEMP.
Computer displays INTERVAL in the left display
and PROD 2 in the right display.
Press TEMP button to exit Product #2
programming.
Press ON/OFF button to exit
programming mode.