8. Storage of Current Test Value
Press button over 2 seconds, the “SAVE” flashes on the screen once with the
sounds of the buzzer. It indicates the setting is finished. It will display the stored value
and the serial number of the storage. Then, the power meter will return to the test state
automatically.
9. Check the Storage Records
Press button, it will display the latest record.
Press button, it will browse the forward records.
Press button, it will browse the afterward records.
Press and button, it will delete all the records.
LOAD
LOAD
λ
REF
REF
FOPM-205
1310nm
ONU
1490nm
MODE
MENU
dBm/dB REF/SEL
SAVE
1550nm
VideoOLT
CO
OPTICAL POWER METER
To Next Page
Loading...