8. Description of Memory Record Function
Description of Interface:
At the main interface, it shows the current recording number on the left bottom of the
page.
Displaying: num: xxxx (xxxx means the current recording number, the maximum
number up to 1000 pieces). As you may refer to the Fig. 8, it means there are 24 pieces
of test recording inside.
Press button for longer than 3 seconds to save the current testing value, as you
may refer to the Fig. 9, the recording number automatically adds 1 when the interface
shows "SAVE".
At the "record view" interface (refer to Fig. 10), the characters on top of the horizon line
are"total number of recording" and "wavelength" (from left to right). The characters
under horizon line are "the number of recording" and the optical power value in
accordance with the corresponding wavelengths.
In the menu mode, select the first "record view", and press button to enter the
"record view" interface, refer to Fig. 10 for this interface.
Fig.8
Fig.9
10-03-03 11: 43: 15
1310nm
ONU
dBm
dBm
dBm
Auto off
1490nm
OLT
num: 0024
Low
Low
1550nm
VIDEO
Low
MODE
10-03-03 11: 43: 15
SAVE
REF/SEL
To Next Page
Loading...