FS FOPM-201 - Page 21

Description of every individual menu:
: Page up to the last 10 recording
: Page down to the next 10 recording
: Page up to the last 100 recording
: Page down to the next 100 recording
ESC: Exit the "record view" interface ( same as press )
X: Select one or more than one recording to delete
RST: Reset the recording memory, this operation is not reversible and it'll take 5 seconds
to complete with power supply can not be disconnected, otherwise it may damage the
chip of tester.
At the "record view" interface, press button to move "X" upward one step, press
button to move "X" downward one step. In Fig. 10, the interface explains that
there are totally 3 testing results inside, "low" means the saving power value is lower
than the value of the threshold setting. In Fig. 11, "high" means the saving power value
is higher than the value of the threshold setting. The digital means the power value of
corresponding wavelength.
Fig.11
Esc X RST
10-03-03 11: 43: 15
25
1310
1490 1550
13: high
high
high
high
high
high
high
high
high
high
high
high
high
high
high
high
high
high
high
high
high
high
high
high
14:
15:
16:
17:
18:
19:
20:
FOPM-107
λ
Menu
Enter
Units
Ref
Optical MPO Power Meter