English
To ensure the safe installation and operation of this product
• The equipment must be installed and integrated;
o Using suitably qualified and trained personnel
o In accordance with any regional electrical codes
o In accordance with the instructions set out in this manual, observing all information, warnings
and instructions
o In accordance with any other instructions or guidance FT Technologies provides
• To ensure that the product remains compliant with the electrical safety requirements of the UL / CSA
61010-1 Standards it must be;
o Connected to an appropriately approved isolated power supply (for example UL/CSA IEC
60950-1:2005 + A1:2009 + A2:2013) rated 12-30VDC and be current limited (6A Max)
o Protected by UL 1449 listed surge protection devices
o Connected with an approved interface cable (for example UL/ CSA recognised AWM style
21198, rated 300V, 80°C)
• The equipment must only be operated within the range of the specified technical data and used for the
purposes for which it was designed
• The equipment should always be transported in packaging which is appropriate, that will prevent any
accidental damage from occurring.
• Always ensure that any failures or errors from the product cannot cause any damage to any other
equipment or property or cause any other consequential effects.
To Next Page
Loading...