User’s manual · TFF 310 CI
- 4 - TFF 310 CI version_en_2.0 FTE maximal
1.4.2. Programming
Below you will find the steps to follow in order to make the programming both from corresponding EVO and MINI field
strength meter as well as from PRO 201 and PRO 300.
In order to start programming the TFF 310 CI regenerator, you will have to go to “Tools” option through the key 8 of your
field strength meter and to select the “Transmodulator Prog.“ option.
Then, it will proceed to recognize the module and to show the main menu. In the “Transmodulator Prog.” are shown the
different configuration options that this tool offers:
1. Select Device
The field strength meter allows making the programming of one or several regenerator/s and/or transmodulator/s from
only one module.
Without interconnection of modules.
An only module connected
Interconnection of several modules, you can select which
module you wish to program.
To Next Page
Loading...