To Next PageTo Next Page
Need help?Do you have a question about the FTS ThermoJet THJ80 and is the answer not in the manual?
Overview of the manual's purpose and the THJ80 ThermoJet.
Details the components and functionality of the THJ80 system.
Details the THJ80's configurations and general layout.
Lists the standard features of the THJ80.
Provides technical specifications like temperature range and dimensions.
Details available options and accessories for the THJ80.
Instructions for safely unpacking the THJ80 ThermoJet unit.
Covers footprint, weight, ambient conditions, and input power.
Specifies requirements for the compressed air supply.
Procedures for returning the unit for service or repair.
Guide for assembling the THJ80 system components.
Details on connecting the touch screen and cables.
Details the various ports and connections on the rear panel.
Instructions for serial communication setup.
Instructions for GPIB communication setup.
Information on detaching and using the touch screen remotely.
Step-by-step guide for operating the motorized arm.
Overview of the PLC and touch screen interface.
Details on the main breaker, EMO button, and startup sequence.
Explains normal, emergency, and post-emergency shutdown.
Warning message for incorrect startup procedures.
Details the NLTC process, its screens, and completion status.
Explains how to use the Manual Mode screen for operation.
Overview of creating and running test programs.
Access to various system settings and calibration tools.
General description of base unit functions and components.
Details the function and components of the air delivery system.
Explains the cascade mechanical refrigeration system.
Step-by-step guide for powering up the THJ80 system.
Explains safety interlocks for pressure and airflow.
Procedure to verify system operation after startup.
Steps for properly shutting down the THJ80 system.
Describes how to use the Manual Mode for temperature control.
How to perform temperature testing using stored profiles.
Interface for creating, loading, and running test programs.
Warning for setpoints outside defined limits.
How to control the THJ80 via RS232 serial communication.
Steps for resolving RS232 communication issues.
How to control the THJ80 via GPIB communication.
Steps for resolving GPIB communication issues.
Guide to install the THJ80 software on a computer.
Steps to install necessary National Instruments drivers.
How to launch and configure the THJ80 application.
Configuring serial communication for the application.
The main interface of the THJ80 application.
Interface for creating and running test programs within the application.
Access to various utility functions within the application.
Lists commands recognized by the ThermoJet system.
Lists GPIB specific commands for the ThermoJet.
Procedure for calibrating the nozzle air temperature.
Screen for calibrating temperature sensors.
Screen for calibrating the DUT temperature.
Steps for calibrating the DUT using an external sensor.
Procedure to match nozzle temp to DUT temp.
Screen to initiate the second temperature calibration.
Confirmation screen for calibration completion.
Overview of maintenance goals and philosophy.
Guidance on assigning maintenance responsibilities.
Recommendations for scheduling maintenance intervals.
Table outlining maintenance based on environment and operation.
Detailed preventative maintenance checklist for the THJ80.
Contact details for FTS Service.
Overview of FTS service capabilities and customer satisfaction.
Details the terms and conditions of the THJ80 warranty.
Information on extended warranty and service plans.
List of refrigeration system parts and their uses.
List of PLC components and their uses.
List of electrical box components and their uses.
List of air and pneumatic system parts.
General| Brand | FTS |
|---|---|
| Model | ThermoJet THJ80 |
| Category | Measuring Instruments |
| Language | English |
