www.fubag.ru
Omperator's anual
--4
5. Shade guide
The shade shadefixed also makes 11 DIN. By means of the table it is possible to define the given
mask at what working conditions it is possible to use.
6. Adjusting
For your safety and to insure that your Auto-Darkening filter Welding Helmet operates correctly,
please read the thoroughly and consult a qualified specialist before use.Operator's Manual
Adjusting the fit of the helmet
- The overall circumference of the headband can be
made larger or smaller by rotating the knob on the
back of the headband. (See adjustment "Y" in fig.1)
This can be done wearing the helmet
just the right tension to be set
.
while allowing
. This way the helmet is
kept firmly on the head without being too tight
Fig.1
TOP
ARC CURRENT, A
WELDING PROCESS
MMA
MIG (heavy)
MIG (light)
TIG
MAG/CO
SAW
PAC
PAW
To Next Page
Loading...