FUDONI P3 - TROUBLESHOOTING GUIDE

3.Tumn on "Screen Casting"/"Cast" in the phone's Settings, then select "AuroraP3-5965B1" to
connect.
4.The connection success
Tip: You can use router WiFi or Android phone's data to connect the projector by the above
steps as needed.
‘ *Notes for Screen Mirroring
1. The smoothness of the projector connection is affected by the strength of your WiFi
signal. Please make sure that the WiFi signal is good enough.
2.1f you connect the projector via a new WiFi the first time, please enter the WiFi password
in the projector.
3.1f your phone cannot recognize the projector, please reset the projector.
4. Some videos or streaming software(Netflix, Amazon Prime, Disney, Hulu, etc) themselves
are protected by the creator's copyright so do not support Screen Mirroring. This is a
common phenomenon in the market. It's not the problem with the projector.
HDMI connections help FUDONI Aurora P3 projector on this issue:
(1)For iPhone, please use an official Apple Lightning Digital AV Adapter.
(2)For PC/Laptop, please use the HDMI cable(included) to connect.
(3)For fire stick, streaming software will work well.
support@fudoni.com X, 1-888-285-2024 @® www.fudoni.com