To Next PageTo Next Page
Need help?Do you have a question about the FuG Elektronik MCP 14–2000 and is the answer not in the manual?
General| Brand | FuG Elektronik |
|---|---|
| Model | MCP 14–2000 |
| Category | Power Supply |
| Language | English |
Warning about dangerous high voltages and ensuring no one is endangered.
Instructions for safe preparation before operating the unit.
Checking input voltage correspondence and safety earth connection requirements.
Mandatory grounding for units with high leakage current.
Conditions for safe operation and ensuring adequate airflow.
Procedure for opening units and warnings about internal capacitors.
Explanation of safety symbols used in the manual.
Details on output polarity, isolation, and short-circuit protection.
Information on permitted load types and connection methods.
Explanation of unit type number and serial number structure.
Details on operating position, EMC, and transport.
Steps for preparing the unit before operation, including mains and earth.
Information on fuses and guidelines for load connection.
Specifies maximum isolation voltages for different unit types.
Identification and function of front panel controls and indicators.
Description of the mains power input and built-in fuses.
Details on the earth stud connection for safety.
Locations for optional analogue programming and Probus V interfaces.
Description of the positive and negative high voltage output sockets.
Overview of the main units comprising the power supply.
Explanation of high voltage generation, filtering, and control mechanisms.
Monitoring of internal electronics and response to overtemperature.
Procedure to select local operation mode.
Steps for powering on and adjusting set values using controls.
How to adjust and use the voltage limitation feature.
Procedure for releasing output and understanding control modes.
Recommended procedure for switching off the unit safely.
Cleaning of fan grids for units with fans to prevent overheating.
Controlling voltage, current, and output via analog interface.
Details on floating analog programming, isolation, and identification.
Detailed description of pins for analog programming interface.
Features and selection of the Probus V digital interface option.
Specifications for AC input voltage and EMC compliance.
Operating environment requirements and safety certifications.
Details on output polarity, isolation, and setting ranges.
Data on reproducibility, resolution, ripple, deviation, and regulating time.
Information on programming speed, display, and status indications.
Information on calibration certificates and subsequent calibration.
Reference to the Certificate of Conformity for the power supplies.
Details on connectors, cables, and mounting instructions.
Information on warranty period and repair procedures.
How special models and modifications are identified.
